Skip to main content

Simple Directions

    After taking an unintended long break after the 100th post, I am back with more examples and several more GIS news. Today, we will take a look at a simple example showcasing the use of the Google’s Directions Services. Using the Google’s Direction service, we can calculate the distance between two points, show the path between these two points, calculate the average time taken to traverse this distance and we can also enforce several constraints on this path.

    The Google Directions API is a service that calculates the directions between locations using an HTTP request. You may pass either an address (string) or a latitude/longitude coordinate as the origin and destination. If you pass an address as a string, the Directions service geocodes the string and converts it to a latitude-longitude coordinate to calculate directions. The origin and destination are two mandatory parameters for a directions request, whereas several other optional parameters like mode of travel, waypoints, avoid tolls, avoid highways, etc. are also used. We will be having a look at each of these parameters in subsequent examples.

    Today, we will have a look at a simple piece of code which will show a path between two pre-defined locations Pune and Mumbai in India (hard-coded example) using the directions services. Let us have a look at the code directly. I have commented the code where ever necessary.



    The output of the above code will appear as seen in the result section above. Two labeled markers will appear at the origin and destination address with a purple polyline depicting the route between the two locations. In later examples, we will see several more complex examples using the Directions Service.

    If you have any queries/ doubts regarding today’s code, please leave a comment! Hope you find this example helpful!
Labels:

Comments

  1. hiSeptember 1, 2011 at 7:50 AM

    Just find your web. I find it enormously interesting. I tested this example but could not get it to work first. Then I added
    link href="http://code.google.com/apis/maps/documentation/javascript/examples/default.css" rel="stylesheet" type="text/css"
    and it did work.

    Perhaps it is a reason for a change of your example?

    ReplyDelete
  2. Shreerang PatwardhanSeptember 1, 2011 at 8:19 AM

    Hello Mr. Hans...Thank you for your feedback. However, I have checked my code again upon reading your comment, but it is still working fine. The map loads up properly without any issues...

    I don't understand why you are facing a problem. The style sheet that you are pointing to is not required in my code as I have set the div style in the code itself!

    As a result, I don't see any reason for a change. However, I appreciate your feedback Sir and I urge other readers to report any such similar error if they face one...

    ReplyDelete

Post a Comment

Please leave your comments here...

Recommended for You

Playing with the markers and info window bubbles...

    In the last few posts, we have seen some marker examples and some information window examples. Now, lets do something interesting combining these two things. Just writing that "This is an info window" in the information bubble is not very interesting! And I know this...Have gone through the same phase!     So, today we will do something interesting! We will display the latitude- longitude co-ordinates of the point that the user clicks on the map! Doing this is not at all complex! Copy paste the following code and you will see for yourself a map coming to life!     The output of the above code looks as seen in the result section above! If you have any queries regarding the above code please comment on the blog post or feel free to contact me at my mail ID .
3 comments
Read more

Ground Truth - How Google Builds Maps

    Todays's article is cross posted from The Atlantic 's Tech section. The article was posted by Alexis Madrigal who is a senior editor at The Atlantic , where he oversees the Technology channel. So, thanks to The Atlantic and Alexis Madrigal, we will have an exclusive look inside Ground Truth , the secretive program to build the world's best accurate maps.     Behind every Google Map, there is a much more complex map that's the key to your queries but hidden from your view. The deep map contains the logic of places: their no-left-turns and freeway on-ramps, speed limits and traffic conditions. This is the data that you're drawing from when you ask Google to navigate you from point A to point B -- and last week, Google showed me the internal map and demonstrated how it was built. It's the first time the company has let anyone watch how the project it calls GT, or "Ground Truth," actually works.     Google opened up at a key moment in its evo...
6 comments
Read more

Difference between word-break: break-all versus word-wrap: break-word

    The 2 CSS properties  word-break: break-all  and  word-wrap: break-word  appear to work in the same way or generate the same output, but there is a slight difference between the 2 and we will be discussing these differences today.     Take a look at the example above. The difference is quite evident, however I will try to explain it further. word-break: break-all Irrespective of whether it’s a continuous word or many words, break-all breaks them up at the edge of the width limit even within the characters of the same word word-wrap: break-word This will wrap long words onto the next line. break-word adjusts different words so that they do not break in the middle.     So if you have many fixed-size spans which get content dynamically, you might just prefer using  word-wrap: break-word , as that way only the continuous words are broken in between, and in case it’s a sentence comprising many words, the spa...
Post a Comment
Read more

The Bicycling Layer...

    Recreational cyclists and bike commuters alike can plot cycle-friendly routes, find trails, and avoid snarling traffic with Google Map's Bicycle layer. Map's bike-friendly, green-toned map layer is very eye-pleasing. The Google Maps API allows you to add bicycle information to your maps using the BicyclingLayer object.     The BicyclingLayer renders a layer of bike paths, suggested bike routes and other overlays specific to bicycling usage on top of the given map. Additionally, the layer alters the style of the base map itself to emphasize streets supporting bicycle routes and de-emphasize streets inappropriate for bicycles.     Let us have a look at the following example. The code has a map which is centered at Pune, India. There are very few cycle tracks in Pune and so you will see just a few dark green lines on the map. But if you would change the latitude-longitude values in the code and center the map at USA, then you will see a...
Post a Comment
Read more

Fusion Table Layer...

    Today we will have a look at the "Fusion Table" Layer example. But before we start with the actual code, we will have a look at what Fusion Table is. Google Fusion Table is a free service for sharing and visualizing data online. It allows you to share data, merge data from multiple tables into interesting derived tables, and see the most up-to-date data from all sources. There is a lot of documentation about Google Fusion Table available on the web. You can visit their home page or the Google Research Blog to gather more information about Fusion Tables.     Let us have a look at the following code. The code is very short and simple to understand!     The few things to look out for in the above code are: The manner in which mapTypeId has been specified! In other Google Maps API v3 examples, we have seen that we specify mapTypeID as ROADMAP, SATELLITE, etc. i.e., all the letters are in uppercase and not in quotes! However, in this...
2 comments
Read more