Skip to main content

Mumbai Metro to implement GIS

          Mumbai's Metro rail system, which is scheduled to take off by next year, will have a Geographic Information System (GIS) for mapping the entire rail tracks and nearby areas to enhance safety, maintenance and traffic regulation.
Mumbai Metro One Pvt. Ltd. (MMOPL) - the special purpose vehicle promoted by Reliance Infrastructure, Mumbai Metropolitan Region Development Authority (MMRDA) and French multinational firm Veolia - is implementing the GIS along the Versova-Andheri-Ghatkopar (VAG) corridor in Phase-I of the project. This is a first-of-its-kind initiative in the country for Metro rail management.

          The GIS system will map the exact location of the trains and all emergency services, including fire stations, police stations and hospitals along the alignment. In case there is a fire incident or other emergencies, the exact location of the nearest fire station or police station can be identified with the help of the GIS map to ensure speedy response.

          MMOPL is building Phase-I of Mumbai's metro project on an 11-kilometer route between Versova and Ghatkopar. GIS, which leverages the power of Global Positioning System (GPS) for real-time asset tracking and monitoring, can map data in various layers and represent it in the form of a map.

           A land base data for the entire Mumbai city is already with the company. Once the construction of the VAG corridor is complete, locations of the piers, viaduct and stations will be imported into the GIS. Each layer in the GIS will map a certain feature along the Metro-I alignment. There are layers pertaining to trees, tracks, piers, building, rolling stock, bridges, roads, distribution transformers and utilities.

           Each of these layers can be selected or deselected as per the requirement. GIS will also be useful in maintenance of the system, like diversion of traffic if required when the whole system takes off. With the help of GIS maps, the exact location of the fault along the network can be determined and a team can be dispatched immediately for speedy maintenance.
Labels:

Comments

  1. UnknownJanuary 25, 2011 at 12:58 AM

    Is there any additional information about the system used for implementation? I wonder what is the structure in there as GIS.
    Regards.

    ReplyDelete

Post a Comment

Please leave your comments here...

Recommended for You

Two maps on the same page - Side-by-side

    How good I am feeling to post a code example after such a long time! It's been all "news" over the past so many posts! Well now that I am finally doing a code example, I am posting a very highly requested code sample. Placing two Google Maps on the same page (Now that's simple you would say!), but side by side. Now this is the thing that most people struggle with. Well, implementing the second part is also very simple, as you will see in today's code.     Let's see the code. Here it is!     The output of the above code will be as seen in the result section above.     As most of you will realize, there are two maps, one centered at "Pune" and other at "Noida". Why I chose these two locations? Well, just like that!...The main issue of concern is how the maps appeared side-by-side and not one below the other as would be normal behavior of two "div" elements used in the same page. Now here is the trick! Check out the...
10 comments
Read more

Jquery Mobile - Nested Listview

    The Jquery Mobile listview is nothing but a ul-li HTML structure styled to appear as a list on a web browser. The plain ul-li structure can be modified to create the nested listview structure. Take a look at the example below, to understand the nested listview structure of Jquery Mobile.      By nesting child  ul  or  ol  inside list items, you can create nested lists. When a list item with a child list is clicked, the Jquery Mobile framework will show a new page populated with the title of the parent in the header and the list of child elements. These dynamic nested lists are styled with the "b" theme swatch (blue in the default theme) to indicate that you are in a secondary level of navigation.     Lists can be nested multiple levels deep and all pages and linking will be automatically handled by the framework. Note that the page of each nested listview is created when the parent page loads and for each nested page the ...
Post a Comment
Read more

Jquery Mobile - Customizing the listview

    In the examples on Basic Listviews that we have seen in the previous posts, you must have observed that the listview is sticking to the top of the screen. You will probably not have only the listview in your web application, but anyways you will have some divs before the listview and the listview will stick to the bottom of the div above it. Many a times, you would like to have some blank space between the div before the listview and the actual listview and this is the time when you would start over-riding the default Jquery Mobile CSS.     The example that we will be seeing today is a very basic example of using custom CSS to override the default JQuery Mobile CSS to suite our own web application or website.     As you can see in the result above, the listview has some margins around it. If you take a look at the CSS for this example, you will notice the following CSS. .ui-listview{     margin: 30px 70px 0 !important; }   ...
Post a Comment
Read more

Google Map's Real-Time Traffic Layer...

    You can now check the traffic condition on the road before you leave for work, or a party or to your friend's place. Google's Traffic layer shows the traffic conditions in your area - LIVE!!! Live traffic data is available in major cities in the United States, France, Britain, Canada and Australia, with new cities and countries frequently added. The Google Maps API allows you to add real-time traffic information (where supported) to your maps using the TrafficLayer object. Traffic information is provided for the time at which the request is made. Consult this spreadsheet to determine traffic coverage support.     Let us now have a look at the Google Maps API - Trafiic Layer example. Copy the following code in a simple text file and save it as html. Click on this html file and it will open in your default browser. You will then see the traffic conditions in your area - LIVE...     The output of the above code looks as seen in the r...
4 comments
Read more

CSS Text and Font

    In this post today, we will take a look at some of the most interesting CSS text and font properties listed below. text-transform white-space word-break word-spacing word-wrap font-variant Text-transform property:     Let's begin with the text-transform property. The filler text used in all the examples below has been taken from Andy Matthew's filler text generator which is a humorous replacement to the traditional boring lorem ipsum .     The text-transform property will turn your text to uppercase, lowercase and also will capitalize the first character of every word. So now you don't need any javascript to do your bidding. This transformation will be done irrespective of the special characters preceding and following the text characters. The following example will make things much more clear and editable of course =) White-space property:     The next property to explore is the white-space  proper...
Post a Comment
Read more