Skip to main content

Four maps on the same page - Playing with events

    In today's example we will see how to add 4 maps on the same web page and then play a bit around with some events in Google Maps API. Lets have a look at the code. All that you have to do to get the code working is copy the code in a text file and save it with .html extension. Open this html file in your browser and you will see the four maps in action!




    Adding the four maps on a webpage should not be a challenge anymore, and all the more after the example Two Google Maps - Side by side that I shared a few weeks back! All you need to pay attention is to the events. There are two events "drag" and "zoom_changed". As the event names suggest, when you will drag or zoom the first map (upper left map), the remaining three maps will also zoom and pan accordingly! Try it out and leave a comment of what you think of it! You can also drop your queries or doubts about the same here!

    The output of the above code appears as seen in the results section above! Hope you enjoy this example!

Labels:

Comments

  1. ParisOctober 19, 2011 at 7:39 PM

    Hi there, This is very cool. Many thanks. I'd like to ask if it's possible to have 4 different maps (different LatLng for each map) on one page. Thanks for your time. Paris

    ReplyDelete
    Replies
    1. Shreerang PatwardhanMarch 10, 2012 at 12:12 AM

      Hi Paris.

      Of course you can do it. Just set the center attribute to different values in the code.

      Give it a try and let me know if you were able to do it. If not I will tell you how it is done.

      Regards,
      Shreerang.
      Like us on Facebook at https://www.facebook.com/pages/Spatial-Unlimited/185149371538692

      Delete
  2. UnknownOctober 4, 2012 at 5:56 PM

    How do I set the center attributes different for each map?

    ReplyDelete
    Replies
    1. Shreerang PatwardhanOctober 4, 2012 at 8:02 PM

      That's easy. You will need 4 different variables like latlng1, latlng2, etc. Each variable will hold the lat-lng value of the centre of the map.

      Now you change the myOptions variables accordingly and you will get 4 maps centred at 4 different locations.

      Delete

Post a Comment

Please leave your comments here...

Recommended for You

Playing with the markers and info window bubbles...

    In the last few posts, we have seen some marker examples and some information window examples. Now, lets do something interesting combining these two things. Just writing that "This is an info window" in the information bubble is not very interesting! And I know this...Have gone through the same phase!     So, today we will do something interesting! We will display the latitude- longitude co-ordinates of the point that the user clicks on the map! Doing this is not at all complex! Copy paste the following code and you will see for yourself a map coming to life!     The output of the above code looks as seen in the result section above! If you have any queries regarding the above code please comment on the blog post or feel free to contact me at my mail ID .
3 comments
Read more

Ground Truth - How Google Builds Maps

    Todays's article is cross posted from The Atlantic 's Tech section. The article was posted by Alexis Madrigal who is a senior editor at The Atlantic , where he oversees the Technology channel. So, thanks to The Atlantic and Alexis Madrigal, we will have an exclusive look inside Ground Truth , the secretive program to build the world's best accurate maps.     Behind every Google Map, there is a much more complex map that's the key to your queries but hidden from your view. The deep map contains the logic of places: their no-left-turns and freeway on-ramps, speed limits and traffic conditions. This is the data that you're drawing from when you ask Google to navigate you from point A to point B -- and last week, Google showed me the internal map and demonstrated how it was built. It's the first time the company has let anyone watch how the project it calls GT, or "Ground Truth," actually works.     Google opened up at a key moment in its evo...
6 comments
Read more

Difference between word-break: break-all versus word-wrap: break-word

    The 2 CSS properties  word-break: break-all  and  word-wrap: break-word  appear to work in the same way or generate the same output, but there is a slight difference between the 2 and we will be discussing these differences today.     Take a look at the example above. The difference is quite evident, however I will try to explain it further. word-break: break-all Irrespective of whether it’s a continuous word or many words, break-all breaks them up at the edge of the width limit even within the characters of the same word word-wrap: break-word This will wrap long words onto the next line. break-word adjusts different words so that they do not break in the middle.     So if you have many fixed-size spans which get content dynamically, you might just prefer using  word-wrap: break-word , as that way only the continuous words are broken in between, and in case it’s a sentence comprising many words, the spa...
Post a Comment
Read more

The Bicycling Layer...

    Recreational cyclists and bike commuters alike can plot cycle-friendly routes, find trails, and avoid snarling traffic with Google Map's Bicycle layer. Map's bike-friendly, green-toned map layer is very eye-pleasing. The Google Maps API allows you to add bicycle information to your maps using the BicyclingLayer object.     The BicyclingLayer renders a layer of bike paths, suggested bike routes and other overlays specific to bicycling usage on top of the given map. Additionally, the layer alters the style of the base map itself to emphasize streets supporting bicycle routes and de-emphasize streets inappropriate for bicycles.     Let us have a look at the following example. The code has a map which is centered at Pune, India. There are very few cycle tracks in Pune and so you will see just a few dark green lines on the map. But if you would change the latitude-longitude values in the code and center the map at USA, then you will see a...
Post a Comment
Read more

Fusion Table Layer...

    Today we will have a look at the "Fusion Table" Layer example. But before we start with the actual code, we will have a look at what Fusion Table is. Google Fusion Table is a free service for sharing and visualizing data online. It allows you to share data, merge data from multiple tables into interesting derived tables, and see the most up-to-date data from all sources. There is a lot of documentation about Google Fusion Table available on the web. You can visit their home page or the Google Research Blog to gather more information about Fusion Tables.     Let us have a look at the following code. The code is very short and simple to understand!     The few things to look out for in the above code are: The manner in which mapTypeId has been specified! In other Google Maps API v3 examples, we have seen that we specify mapTypeID as ROADMAP, SATELLITE, etc. i.e., all the letters are in uppercase and not in quotes! However, in this...
2 comments
Read more