Skip to main content

Jugnu: India's first Nano Satellite

          IIT-Kanpur with its nano satellite 'Jugnu' has set new highs in the field of space research. A team of students, working under Dr NS Vyas (the visionary man behind the making of the nano-satellite) and other faculty members of the institute, have successfully made the country's first nano-satellite to be developed for the first time by any educational institute.

          The development of the Jugnu started in the year 2008 with a team of 3 students. With time, the team has grown to the size of more than 50 students ranging from 1st year undergraduates to final year postgraduates and 14 professors from different disciplines to complete this challenging mission.
           The satellite has been handed over to two ISRO scientists, DVA Raghav Murthy (Project Director, Small Satellite Projects) and Dr SK Shiv Kumar (Director, ISRO satellite tracking centre), by President Pratibha Patil on March 6, 2010. View the pictures of the ceremony at IIT Kanpur's photo gallery.

          Golden Jubilee year of IIT Kanpur(Aug 2009- Dec 2010) will witness the launch of Jugnu from Satish Dhawan Space Centre (also known as SHAR, located in Sriharikota, Andhra Pradesh) by ISRO’s Polar Satellite Launch Vehicle. Jugnu will be able to withstand the harshness of space environment for its estimated life span of 1 year.
             
          Weighing less than three kg and with most functionalities of a normal satellite on a small platform, the payload of the satellite will include an indigenously designed camera for near remote sensing and a GPS receiver. 'Jugnu' will transmit blinking signal at all times, all over the Earth. It will revolve around the Earth 15 times a day in polar orbit and will be visible over Kanpur for three to four times for a total of 20 minutes. After its launch, Jugnu will be continuously monitored and controlled by Ground Station located on the IIT Kanpur campus.
          The main objectives behind making a nano satellite were to serve the following applications:
1. Micro Imaging System
2. GPS receiver for locating the position of satellite in the orbit
3. MEMS based IMU (Inertial Measurement Unit)
Labels:

Comments

Post a Comment

Please leave your comments here...

Recommended for You

Where does Google get it's live traffic data from?

Referring to a post that I wrote earlier, Google’s - Live traffic Layer , ever wondered how Google collected this data? I was wondering the other day, how Google received live data to display it on their maps as a layer! I looked up the web and found something very interesting and am sharing the same with you all. As we all know, the traffic layer is available most accurately in several states in USA. Most major metro areas in the US have sensors embedded in their highways. These sensors track real time traffic data. Easy to miss at high speeds (hopefully anyway, traffic permitting), more commonly noticed may be the similar sensors that often exist at many busy intersections that help the traffic lights most efficiently let the most amount of people through. The information from these tracking sensors is reported back to the Department of Transportation (DOT). The DOT uses this data to update some of the digital signs that report traffic conditions in many metro areas. They als
17 comments
Read more

Two maps on the same page - Side-by-side

    How good I am feeling to post a code example after such a long time! It's been all "news" over the past so many posts! Well now that I am finally doing a code example, I am posting a very highly requested code sample. Placing two Google Maps on the same page (Now that's simple you would say!), but side by side. Now this is the thing that most people struggle with. Well, implementing the second part is also very simple, as you will see in today's code.     Let's see the code. Here it is!     The output of the above code will be as seen in the result section above.     As most of you will realize, there are two maps, one centered at "Pune" and other at "Noida". Why I chose these two locations? Well, just like that!...The main issue of concern is how the maps appeared side-by-side and not one below the other as would be normal behavior of two "div" elements used in the same page. Now here is the trick! Check out the th
9 comments
Read more

Geodashing...

            Geodashing!?!? Sounds something similar to Geocaching right? Well, it is! Geodashing is very similar to Geocaching in the sense that people are searching for a particular spot with only a set of coordinates as their clue.             Here's how it works. In each game, a large set of waypoints, called dashpoints, from all over the world is posted on the Web. Dashpoint locations are chosen at random by computer, with all the unpredictability that presents. Dashpoints might be in suburban neighborhoods or in the middle of wilderness areas. Then, the race is on to see who can reach the most dashpoints before the deadline.             Geodashing players can participate as individuals or as teams of up to five players to increase the number of dashpoints reached. The competition is friendly and teamwork helps to get high scores, so put your online acquaintances to good use.             Because the dashpoints are spread all over the world, it doesn't matter w
Post a Comment
Read more

Delhi Metro's Airport Express Corridor mapped on GIS...

         The Delhi Metro's showcase Airport Express Corridor, connecting the Indira Gandhi International Airport to the heart of the Delhi, was rolled out for the public on the 23rd of February, 2011.          This is the first line in India to be mapped on GIS to enhance safety, maintenance and traffic regulation. Mapping the corridor on GIS will help in mobilising emergency services in case of a blast or fire on the train. Delhi Airport Metro Express Private Limited, the company operating the line, has mapped all the emergency services, including fire stations, police stations, hospitals, etc. along the alignment.
Post a Comment
Read more

Geodesic Polyline

    Today we will have a look at a very interesting polyline example - "The geodesic polyline". Now the first question that will pop is "What is geodesic?". Mathematically, geodesic means the shortest line between two points on a mathematically defined surface, as a straight line on a plain or an arc of a great circle or sphere.     The next question after reading the above definition is clearly, "Why do we need geodesic polylines?" and that would be followed up with "What is this Great Circle?". We will discuss this first, before we move on to the actual example today. The example is very very similar to the normal polyline example, with just a small change.     Having said so, I will now try to explain why we need a geodesic polyline? The shortest distance between two locations on the earth is rarely a straight line as the earth is roughly spherical in nature. So any two points on the earth, even if they are very close lie on a curve and n
5 comments
Read more