Skip to main content

What is GPS?

            Having seen what GIS is, we will now have a look at what GPS or the Global Positioning System is! Wikipedia's following GPS definition says it all. "The Global Positioning System (GPS) is a space-based global navigation satellite system (GNSS) that provides reliable location and time information in all weather and at all times and anywhere on or near the Earth when and where there is an unobstructed line of sight to four or more GPS satellites."

           The Global Positioning System (GPS) is a satellite-based navigation system made up of a network of 24 satellites placed into orbit by the U.S. Department of Defense. The 24 satellites are orbiting the earth about 12,000 miles above us. They are constantly moving, making two complete orbits in less than 24 hours. These satellites are travelling at speeds of roughly 7,000 miles an hour.

          GPS satellites are powered by solar energy. They have backup batteries onboard to keep them running in the event of a solar eclipse, when there's no solar power. Small rocket boosters on each satellite keep them flying in the correct path.

          Here are some other interesting facts about the GPS satellites (also called NAVSTAR, the official U.S. Department of Defense name for GPS):
  • The first GPS satellite was launched in 1978.
  • A full constellation of 24 satellites was achieved in 1994.
  • Each satellite is built to last about 10 years. Replacements are constantly being built and launched into orbit.
  • A GPS satellite weighs approximately 2,000 pounds and is about 17 feet across with the solar panels extended.
  • Transmitter power is only 50 watts or less.



            GPS satellites circle the earth twice a day in a very precise orbit and transmit signal information to earth. GPS receivers take this information and use triangulation to calculate the user's exact location. Essentially, the GPS receiver compares the time a signal was transmitted by a satellite with the time it was received. The time difference tells the GPS receiver how far away the satellite is. Now, with distance measurements from a few more satellites, the receiver can determine the user's position and display it on the unit's electronic map.

            A GPS receiver must be locked on to the signal of at least three satellites to calculate a 2D position (latitude and longitude) and track movement. With four or more satellites in view, the receiver can determine the user's 3D position (latitude, longitude and altitude). Once the user's position has been determined, the GPS unit can calculate other information, such as speed, bearing, track, trip distance, distance to destination, sunrise and sunset time and more.



             Today's GPS receivers are extremely accurate. Today GPS receivers are embedded in a large number of phones. Day-by-day, knowingly or un-knowingly the common man is getting more and more exposure to GIS and GPS technology based systems. Cheers to Geo!...
Labels:

Comments

  1. Hrishikesh PNovember 27, 2010 at 6:16 PM

    have you heard about USGS? Its one and only service provider for all GPS systems. Not even google provides its own map service, google too uses USGS. For more info visit usgs.gov

    ReplyDelete
  2. Shreerang PatwardhanNovember 27, 2010 at 6:20 PM

    Ya...It's the US Geological Survey...Isn't it?...Yes I know about it!

    ReplyDelete

Post a Comment

Please leave your comments here...

Recommended for You

Where does Google have live traffic information?

Where does Google have live traffic information.md Where all can I see the real-time traffic data? This question has been asked a several hundred times by several hundred people on several hundred forums. Probably you too have had this question. Well, we now have an answer to it and a very good one. Click on the image below and you would be redirected to a map from Google which will show you all the places at which live traffic data is available. Hope you’ll enjoy this and quench your thirst to know more about the Google Real Time traffic data. Update 10/31/2017 Previously the availability of traffic would be shown as seen in the image below, but now you need to be at a minimum of zoom level 5 and centered on the location of your choice to see where traffic data would be avialble. If haven’t already read from where Google gets it’s traffic data, be sure to check out this earlier post. Do post any question you have about the Google Maps, and I will try and answer as many as I can. Fo...
Post a Comment
Read more

The Bicycling Layer...

    Recreational cyclists and bike commuters alike can plot cycle-friendly routes, find trails, and avoid snarling traffic with Google Map's Bicycle layer. Map's bike-friendly, green-toned map layer is very eye-pleasing. The Google Maps API allows you to add bicycle information to your maps using the BicyclingLayer object.     The BicyclingLayer renders a layer of bike paths, suggested bike routes and other overlays specific to bicycling usage on top of the given map. Additionally, the layer alters the style of the base map itself to emphasize streets supporting bicycle routes and de-emphasize streets inappropriate for bicycles.     Let us have a look at the following example. The code has a map which is centered at Pune, India. There are very few cycle tracks in Pune and so you will see just a few dark green lines on the map. But if you would change the latitude-longitude values in the code and center the map at USA, then you will see a...
Post a Comment
Read more

Google Map's Real-Time Traffic Layer...

    You can now check the traffic condition on the road before you leave for work, or a party or to your friend's place. Google's Traffic layer shows the traffic conditions in your area - LIVE!!! Live traffic data is available in major cities in the United States, France, Britain, Canada and Australia, with new cities and countries frequently added. The Google Maps API allows you to add real-time traffic information (where supported) to your maps using the TrafficLayer object. Traffic information is provided for the time at which the request is made. Consult this spreadsheet to determine traffic coverage support.     Let us now have a look at the Google Maps API - Trafiic Layer example. Copy the following code in a simple text file and save it as html. Click on this html file and it will open in your default browser. You will then see the traffic conditions in your area - LIVE...     The output of the above code looks as seen in the r...
4 comments
Read more

Material UI, Google Polymer & Web Components

    Google introduced Material UI during the Google I/O a few days back. Since then the web is all abuzz with articles about material UI and what Polymer is and how these 2 fit together. In this article today, I will try and helps us all to get a better understanding of these new concepts.     So, let's start with Material UI first. Google has for long been trying to bridge the gap between the Web and the Android worlds with a unified user interface and Google's Material UI is a big step towards this. The new design philosophy is about dynamically adjusting the elements according to screen size, add more white space between elements, provide a lot of user feedback using animations, make use of bold UI colors and be flat and 3D about the design at the same time. Now that sounds really cool, isn't it? Well, actually it is and you will actually appreciate and enjoy it all the more when you watch the following video from this year's Google I/O.   ...
Post a Comment
Read more

Panoramio Layer...

    Let's start with the obvious question first...What is Panoramio? Panoramio is a geolocation-oriented photo sharing website. Panoramio website was officially launched on October 3, 2005 by Joaquín Cuenca Abela and Eduardo Manchón Aguilar, two Spanish entrepreneurs and was acquired by Google in July 2007.     Accepted photos uploaded to the site can be accessed as a layer in Google Maps, with new photos being added at the end of every month. The site's goal is to allow Google Maps and Google Earth users to learn more about a given area by viewing the photos that other users have taken at that place. The website is available in several languages and can be viewed here .     You may add photos from Panoramio as a layer to your maps using the PanoramioLayer object. The PanoramioLayer renders a layer of geotagged photo icons from Panoramio on the map as a series of large and small photo icons. Let us now have a look at the following code t...
2 comments
Read more